【JE Machine Tech】Bead-Blasted/Cerakote Ready, Made in USA 11" Aluminum KeyMod Handguard for .223, White #00682

J&E Machine Tech

  • $0.00


Have a Question?

Be the first to ask a question about this.

Ask a Question

11" Aluminum KeyMod Handguard, .223, White Bead-Blasted with NSR type barrel nut with allen screws included. Continuous Picatinny Rail section with ventilated base on top for mounting optics and sights.  Modeled after Noveske Gen II full-floating handguard.


Product Features

  • Patent Pending
  • Bead-Blasted "White" ready for Cerakote Finish
  • Barrel Nut and hardware included
  • Made in USA


Free- Float Handguard including NSR Barrel Nut Installation Instruction and Tips:

 1) Hand tightened the barrel nut on both ways to determine which side would align the best. The top set of holes landed just shy of 12 o'clock (with clockwise being the direction the barrel nut was turned to tighten it on).

2) After removing and applying grease to the threads, I torqued the nut to the receiver at 40lbs. You need to do this multiple times.

3) After each torque down I removed the barrel nut with a breaker bar and increased the weight on my torque wrench for the next torque down. The nine times was a result of how many of these repetitions I had to complete in order to reach the proper torque weight (which aligned the nut properly).


All HUNTER SELECTION accessories carry a 100% satisfaction guarantee against manufacturer's defects in original materials and workmanship. If your HUNTER SELECTION accessory shows evidence of such defects, HUNTER SELECTION will fix, repair, or replace your accessory at the most cost effective manner possible. HUNTER SELECTION does not warranty products or damage caused to our products as a result from improper installation or incorrect installation of other manufacturers' products. Be sure to keep your sales ticket or receipt as proof of purchase date when making a claim.

We Also Recommend



Sold Out